Truck Frame Paint Por 15

There are many features and formula elements possessed by this paint, and choosing our favorite is tough. Surface preparation all surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter.

tumblr_nt7yubZ1TZ1u7vu4ao1_1280.jpg 1,280×1,109 pixels

I am very satisfied with the finish and durability.

Truck frame paint por 15. Put a piece of tape behind the larger pinholes, then paint. At the end of the test period, coated steel was free of rust or pitting. The rust was still there!

Eastwood sells a chassis black that works well but you can use just about anything you choose. After the surface is dry, sand, strip or blast paint the surface to expose the bare metal underneath and to remove any existing traces of rust. Previously painted areas scuff surface with 320 grit sand paper.

If you are applying an epoxy primer, apply two medium wet coats, waiting 30 minutes between each. (insert sarcasm emoji) moving on, in 2007, i sprayed the bottom of the floor pan and firewall with 1 quart of dp and ss urethane. Before the second coat, i sanded off the p15 over the vin number to get a picture.

We've also got special products to encapsulate and deactivate rust, even deep inside frame rails where normal paints can't get at it. Por15 is also uv sensitive so it is advisable to top coat it with another type of paint. This paint also prevents recurring rust by sealing your metal against exposure to moisture.

Use por 15 in a well ventilated area as it is quiet nasty. When the paint dries, pull the tape off and paint the back side as well. If you do not the por 15 will start to deteriorate almost immediately.

A typical example is the por rust preventive paint, a superb formula created for rust and corrosion prevention as well as the beauty of your truck frame and chassis. Area with 2 coats of paint coverage. The paint turns into hard abs that stick to the surface.

They also had quite a short shelf life, though that’s no longer a problem in many cases. You get top quality protection at a tremendous value! The interesting thing about this undercoating is that it can be directly applied to the corroded surface without having to remove any rust buildup.

On top of all that, eastwood also has everything you need to clean and prep your chassis for paint. The restoration i completed 3 years ago looks as if it was done a few months ago. Bare steel or aluminum clean and prep surface then let dry thoroughly.

Por 15 vs eastwood rust encapsulator vs chassis saver vs rust cap vs rust stop + eastwood internal frame coating.

Fuel tank repair kit. (With images) Mopar, Chassis paint